Material Info for Craft Vinyl Sheets

We recommend performing a test cut each time. We apologize in advance, but we are unable to provide any technical support for your cutting machine, please refer to the manufacturer's website for support. 

HT Transfer Vinyl (for fabric)
-Siser ColorPrint PU Glossy or Matte
-2.8 mil/70 Microns
-Cut with 45° blade
-Requires less heat & pressure for application and is very soft!!
-Applies to most fabric types including 100% Cotton, 100% Polyester, Poly/Cotton blends, Canvas, Linen, Rayon, Silk, Leather, Lycra/Spandex
-Does NOT apply to: 100% Nylon, Nylon Blends, fabrics marked "Do Not Iron/Decorate" or "Dry Clean Only", chunky/open weave fabric, any fabric with a waterproof coating, Glass

HT Transfer Glitter (for fabric)
-Siser SparklePrint Vinyl
-7.48mil/190 Microns
-Embedded Silver Glitter that is smooth not textured when applied
-Cut with 60° blade & reduce cutting speed
-Cut in small batches and check cut quality after each sheet, blade will wear out faster
-May not be suitable for cutting small designs and/or designs will detailed/intricate cuts
-Applies to most fabric types including 100% Cotton, 100% Polyester, Poly/Cotton blends, Canvas, Linen, Rayon, Silk
-Does NOT apply to: 100% Nylon, Nylon Blends, Leather, Lycra, Spandex, Lycra/Spandex Blends, fabrics marked "Do Not Iron/Decorate" or "Dry Clean Only", chunky/open weave fabric, any fabric with a waterproof coating, Glass

• Heat Transfer materials must be applied with a heat source: Home Iron, Cricut Easy Press or Commercial Heat Press
• Permanent One Time Application
• Vinyl can only be layered when using a Commercial Heat Press (not with home iron or Cricut Easy Press)
• Glitter cannot be layered over Glitter, can be layered over Vinyl only with a Commercial Heat Press (no iron or Cricut Easy Press)
• Machine Washable, dry low heat or air dry
• CPSIA Certified safe for children's clothing
• Can be applied to some hard surfaces including wood & Cardstock
• A sample test/practice piece is included with every order
• Sizes: 4x4, 6x6, 8x8, 10x10, 12x12 all come with transfer mask pre-applied*
• Sizes: 4x24, 6x24, 8x24, 10x24 & 12x24 are available with* or without mask
• WITH Mask: you place the material Face DOWN and cut the design in reverse(or mirrored)
• WITHOUT Mask: you place the material Face UP and cut the design normal

*After printing, we apply the mask using a commercial laminating machine to ensure there are no bubbles or wrinkles! 

Click Here for Home Iron Application Instructions

Click Here for Cricut Application Instructions

Click Here for Heat Press Application Instructions 

Sticker (for Hard Surfaces)

Cut the material Face UP, transfer tape is required for transferring designs with multiple pieces (not included)

Glitter is only up to 21" wide

Vinyl Sticker
Oracal 3640 Gloss or Matte Finish
-Cut with 45° blade

Glitter Sticker
Oracal 851 vinyl with Embedded Silver Glitter
-Cut with 45° blade
 

• Permanent one-time Self Adhesive application for flat and gently curved hard surfaces ex. glass, metal, plastic, ceramic, wood
• Not recommended for surfaces that could be easily damaged when removed such as walls, painted surfaces, etc
• Will Not adhere to rough or textured surfaces such as popcorn walls, un-sanded wood, etc
• Removable (but not re-usable) from most surfaces except for paper, laminate, cardboard, etc. 
• Outdoor grade vinyl guaranteed for at least 3 years not laminated
• 5 years with lamination
• Waterproof
• Not microwave safe
• Dishwasher safe HOWEVER we recommend handwashing only to prevent ink from fading as fast over time
• Ink will fade over time on items handled frequently from the natural oils in hands, this is normal and not considered a defective product

 Click Here for Sticker Application Instructions