Vinyl Cutting Instructions

 Print PDF Vinyl Cutting Instructions

Wash/Care Instructions

Please contact us if you have any questions

orders@stickersbystephanie.com  

 

  • Use the recommended vinyl cutting settings for your specific machine
  • Vinyl sticker material that is laminated, will require a different setting for thick material
  • We recommend preforming a test cut each time
  • Place material face up in machine or on a cutting mat
  • Do not reverse design, cut design face up
  • Weed design
  • Mask for Heat Transfer:
    • Lay mask with white paper side UP, and peel back white paper and set aside
    • Place cut design face DOWN on mask, toward the middle and smooth outwards
    • Press vinyl on mask with firm outward strokes with a squeegee (credit card or similar shape item may work as well), smoothing out air bubbles from the center of the design toward the edges
    • Peel away clear backing material and discard
    • If not applying immediately, replace the white paper backing (with the shiny side inside) to keep the mask/transfer clean
    • Follow Home Iron, Circuit Easy Press or Commercial heat press instructions on our website for application

 

  • Mask for Sticker:
    • Lay out transfer tape sticky side UP
    • Place cut design face DOWN on tape, toward the middle and smooth outwards
    • Press vinyl on mask with firm outward strokes with a squeegee (credit card or similar shape item may work as well), smoothing out air bubbles from the center of the design toward the edges
    • Follow instructions on our website for Sticker application
  • Sticker material that is laminated can be applied by peel and stick method